ISDT BL8 Smart Battery Display with Active Balance/Accurate Voltage/APP Control
48.67 USD
54.08 USD
6.99 USD
10%
offSKYRC D750 MIX Charger AC500W DC1600W 8S Lipo Battery Smart Charger SK-100201
298.99 USD
332.21 USD
25.99 USD
10%
off9IMOD 5.8G FPV Goggles 008D 008PRO 40CH 4.3inch w/ DVR 800x480 For Racing Drone
122.42 USD
136.02 USD
25.99 USD
10%
off9IMOD Aerial Vehicle Throw Device 35kg Servo +Servo Throw Device for RC Drone
27.79 USD
30.88 USD
6.99 USD
10%
off9IMOD 1/5/10Pair RC Bullet Connectors Male Female Banana Bullet Connector Plug
6.96 USD
7.73 USD
6.99 USD
10%
off9IMOD Brushless Servo 25/35/45/51/71KG Servo for 1:5 1:8 1:10 RC Car Boat Robot
43.08 USD
47.87 USD
6.99 USD
10%
offHOBBYWING Brushless ESC Platinum 25/40/80/120/150/180/260A For RC Aircraft
38.26 USD
42.51 USD
15.99 USD
10%
offRC Car Work Stand Metal Repair Workstation w/ Magnetic Tray For 1:8 1:10 RC Car
18.77 USD
20.85 USD
6.99 USD
10%
off9IMOD Brushless 30A ESC &1621 Motor Combo Mini For 1/18 RC Car Axial SCX24 TRX4M
27.54 USD
30.6 USD
6.99 USD
10%
offHOBBYWING EzRun Brushless 330A ESC 5690/56118 Brushless Motor For 1/8 1/7 RC Car
205.91 USD
228.79 USD
15.99 USD
10%
offHABOTEST HT106 Outlet Tester LCD Display Electrical GFCI Receptacle Detector
15.3 USD
17.0 USD
6.99 USD
10%
offHotRC CT-8B 8CH Radio Transmitter 2.4GHz F-08A Receiver For RC Car Boat Robot
12.99 USD
14.43 USD
6.99 USD
10%
off
Features:1. AM32 custom firmware.2. All wires of have been pre soldere.3. Detachable design, convenient for cleaning and maintaining.4. Aluminum Cooling System: The ESC possesses an aluminum cooling system offering excellent heat dissipation a strong5. Small and light Brushless ESC Motor Combo, for your vehicle.6.Can be directly paired with the SCX24 original gearbox 7. Suitable for 1/24 Crawler Car Axial SCX24 .(Note:The remote must be adjusted to the neutral position for the ESC to connect)
Description:
9IMOD Brushless ESC Motor Combo AM32 30A Mini ESC 1224 Motor 4000KV 5000KV Outrunner Motor For RC 1/24 Crawler Car Axial SCX24 ,Can be directly paired with the SCX24 original gearbox.
Please note: if you want to programming the ESC, please purchase the set with USB link, thanks
Specifications:
AM32 30A ESC
Brand: 9IMOD
Battery: 2~4S Lipo
BEC: 6V@2A
Continuous Current: 30A
Momentary Current(10s):80A
Motor:1224/1621/2204 Brushless Motor
Suitable For: 1/18 1/24Crawler Car Axial SCX24
Dimensions:285x19x9mm
Weight: 15g
1224-4000kv Motor Specifications:
No load current (1o/7.4V):0.2Amps
Motor speed:29600
Madame resistance (rm):0.001 Ohms
Motor wire diameter:0.18mm
Suit for: 1/24 RC Crawler Car Axial SCX24 WPL FMS FCX24M
1224-5000kv Motor Specifications:
No load current (1o/7.4V):0.3Amps
Motor speed:37000
Madame resistance (rm):0.002 Ohms
Motor wire diameter:0.29mm
1224-3600kv Motor Specifications:No load current (1o/7.4V):0.2AmpsMotor speed:25000Madame resistance (rm):0.001 OhmsMotor wire length:0.29mm
Please note:Before use, calibrate the throttle of the AM32 ESC to ensure motor will work. Due to variations in deadband control settings across different remote controllers and differences in PWM speed controllers used during factory testing, calibrate the remote controller's travel range immediately upon receiving the AM32 ESC for optimal performance.
Follow these steps:
1: Ensure the transmitter and receiver are paired. Connect the AM32 ESC's DuPont signal wire to the receiver's CH2 channel. Do not power the ESC yet.
2: Push the RC transmitter throttle fully forward and hold it steady. Power on the AM32 ESC. You will hear two beeps. Immediately pull the throttle fully backward. After hearing one beep, release the RC throttle to return it to center position. The AM32 ESC will emit a single beep, indicating throttle calibration is complete.
This calibration enables more precise RC throttle control over the AM32 ESC and is compatible with 99% of ESCs on the market.
Package contents:
1*30A ESC
1* 1224 Brushless Motor
Note:
Only the above package content, other products are not included.
1.Due to the difference between different monitors,the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures.
2.Due to the manual measurement and different measurement methods, please allow 1-3mm deviation.Thanks!
Before purchase:
1.All the goods are ready stock, we will arrange the shipment at once if we receive the order.
2.Please read the item description, if you have any question, do not hesitate to contact us.
3.No warranty,if you receive a defect item,please contact us at once with item picture.
4.Use the vouchers for more saving.
After purchase:
1.If you are satisfied,please express your use feeling.
2.Please contact us before you are going to give us bad review. We are helpful and will solve the problems. If you receive a defect item,please contact us at once with item picture or video.