Axial RC Truck 1/10 SCX10 III Jeep JT Gladiator Rock Crawler with
Portals RTRUSD $1,050.00
Condition : Used
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
This listing is for an Axial Racing SCX10 III, 1/10 Scale
Rock Crawler.
This vehicle is a “Shelf Queen” and has only been run outside one time.
As shown in the photos, it is in pristine (like new) condition.
This amazing vehicle includes more than 40 upgraded/additional parts, costing more than $1500.
Most, but not all of those upgrade parts, are listed in the table shown in an attached image.
Some of the highlights of those upgrades are as follows:t ·
HobbyWing, “AXE540-FOC Sensored Brushless Motor (2300kv)”, offering the smoothest low speed operation available.
Also includes a small heatsink and cooling fan to keep the motor working at peak performance. ·
All stainless-steel high clearance link set ·
Fast Eddies SCX10 III Sealed Bearing Kit.
All stock bearings were replaced with these stainless steel sealed bearings. ·
2.2 Inch Beadlock Wheels ·
ProTek RC 370TBL "Black Label" Waterproof (steering) Servo ·
Reef's RC 99 Waterproof Micro Servo, for the dig operation ·
Savox Waterproof Micro Servo, for the two-speed shift operation ·
RC4WD Z-S1079 1/10 Warn Winch ·
Powershift RC Winch Controller ·
Upgraded shocks and shock springs ·
Lightweight aluminum front and rear axles, portals and steering knuckles. ·
Treal Brass Outer Portal Covers, front and rear ·
Complete stainless-steel hardware (screws) upgrade ·
Almost every other stainless steel or aluminum upgrade part that is available
In addition to all of the upgraded parts listed above and, in the table (shown in image), almost every other original (mostly plastic) part that came with the Axial SCX10.III, is also included.
So, if you really prefer the original plastic axles for example, you can swap them back in again.
[IMPORTANT NOTES] ·
This listing does NOT include a receiver or transmitter.
You will need to supply your own Rx and Tx electronics. ·
This listing does NOT include the original Jeep Wrangler JL Lexan body.
That body was sold separately last year, since I was using a KYX Jeep Hard Body Convertible. ·
The body that does come with this vehicle, is an “INJORA Jeep Wrangler Hard Body Convertible”.
This body is brand new.
Please note that in order to actually use this new body, some modifications will need to be made to the body, in addition to adding magnets to hold it in place. ·
The front and rear inner fenders have been modified slightly (trimmed) to fit the KYX Jeep Hard Body I originally had on this vehicle.
So those inner fenders, are just slightly narrower than they were originally, but can easily be replaced if desired. ·
The receiver box is from Traxxas, since it provides more space for the receiver and wires.
It has also been re-located to the back of the vehicle to facilitate the fitting of the Jeep Hard Body I was using. ·
In the front of the vehicle, there’s a plastic bracket that runs under the motor and spans between the two frame rails.
The original plastic bracket did not allow the HobbyWing AXE540 to fit properly.
So, I designed and 3D printed a custom bracket that is currently installed in this model, however the original one is included.
You may be able to see that custom bracket in the bottom photos provided. Item Price 2.2 Inch Beadlock Wheels $ 43.00 Aluminum Body Shell Brackets $ 11.00 Aluminum Front Bumper $ 20.00 Aluminum Front Bumper Mount $ 21.00 Aluminum Rear Bumper $ 30.00 Aluminum Rear Bumper Mount $ 20.00 Aluminum Tie Rod Linkage Brackets $ 18.00 Aluminum Upper Shock Tower Brace $ 21.00 Axial Racing 11T Pinion Gear - 3mm Shaft $ 11.00 Axial Racing 12T Pinion Gear - 3mm Shaft $ 7.00 Axial SCX10 III Jeep Wrangler JL 1/10 Scale Rock Crawler Kit $ 370.00 Cooling Fan & Heatsink $ 9.00 Fast Eddies SCX10 III Sealed Bearing Kit $ 45.00 High Clearance Links (Stainless Steel) $ 65.00 Hobbywing AXE 550 System - ESC/Motor Combo $ 140.00 INJORA Jeep Wrangler Hard Body Convertible $ 51.00 JX HV1151MG Waterproof Micro Servos $ 46.00 KYX Aluminium Alloy Rear Suspension Bracket Arm $ 21.00 Metal Skid Plates $ 20.00 Metal Trailer Hitch $ 20.00 Powershift RC Winch Controller $ 35.00 ProTek RC 370TBL "Black Label" Waterproof Servo $ 160.00 RC4WD Z-S1079 1/10 Warn 9.5cti Winch $ 30.00 Reef's RC 99 Waterproof Micro Servo $ 60.00 Savox Micro Servos $ 20.00 Stainless Steel Hardware Kit $ 35.00 Traxxas E-Revo Receiver Box $ 7.00 Traxxas GTS TRX-4 Shock Set (4 Shocks) $ 65.00 Treal Brass Weighted Front Steering Knuckle Covers $ 25.00 Treal Front Steering Knuckles $ 56.00 Treal SCX10 III Aluminum 7075 Front Axle - Black $ 98.00 Vangquish Incision All Metal Front & Rear Driveshafts $ 60.00 Vanquish Products SLW 600 Wheel Hubs $ 21.00 VITAVON CNC Aluminum Front Shock Tower Mounts $ 29.00 VITAVON CNC Aluminum Panhard Mount $ 17.00 VITAVON CNC Aluminum Rear Axle - Black $ 118.00 VITAVON CNC Aluminum Rear Shock Tower Mounts $ 26.00 VITAVON CNC brass portal cover black $ 66.00 Wheel Lug Nuts $ 9.00 Rock Lights - LED's Total: $1,926.00
This vehicle is a “Shelf Queen” and has only been run outside one time.
As shown in the photos, it is in pristine (like new) condition.
This amazing vehicle includes more than 40 upgraded/additional parts, costing more than $1500.
Most, but not all of those upgrade parts, are listed in the table shown in an attached image.
Some of the highlights of those upgrades are as follows:t ·
HobbyWing, “AXE540-FOC Sensored Brushless Motor (2300kv)”, offering the smoothest low speed operation available.
Also includes a small heatsink and cooling fan to keep the motor working at peak performance. ·
All stainless-steel high clearance link set ·
Fast Eddies SCX10 III Sealed Bearing Kit.
All stock bearings were replaced with these stainless steel sealed bearings. ·
2.2 Inch Beadlock Wheels ·
ProTek RC 370TBL "Black Label" Waterproof (steering) Servo ·
Reef's RC 99 Waterproof Micro Servo, for the dig operation ·
Savox Waterproof Micro Servo, for the two-speed shift operation ·
RC4WD Z-S1079 1/10 Warn Winch ·
Powershift RC Winch Controller ·
Upgraded shocks and shock springs ·
Lightweight aluminum front and rear axles, portals and steering knuckles. ·
Treal Brass Outer Portal Covers, front and rear ·
Complete stainless-steel hardware (screws) upgrade ·
Almost every other stainless steel or aluminum upgrade part that is available
In addition to all of the upgraded parts listed above and, in the table (shown in image), almost every other original (mostly plastic) part that came with the Axial SCX10.III, is also included.
So, if you really prefer the original plastic axles for example, you can swap them back in again.
[IMPORTANT NOTES] ·
This listing does NOT include a receiver or transmitter.
You will need to supply your own Rx and Tx electronics. ·
This listing does NOT include the original Jeep Wrangler JL Lexan body.
That body was sold separately last year, since I was using a KYX Jeep Hard Body Convertible. ·
The body that does come with this vehicle, is an “INJORA Jeep Wrangler Hard Body Convertible”.
This body is brand new.
Please note that in order to actually use this new body, some modifications will need to be made to the body, in addition to adding magnets to hold it in place. ·
The front and rear inner fenders have been modified slightly (trimmed) to fit the KYX Jeep Hard Body I originally had on this vehicle.
So those inner fenders, are just slightly narrower than they were originally, but can easily be replaced if desired. ·
The receiver box is from Traxxas, since it provides more space for the receiver and wires.
It has also been re-located to the back of the vehicle to facilitate the fitting of the Jeep Hard Body I was using. ·
In the front of the vehicle, there’s a plastic bracket that runs under the motor and spans between the two frame rails.
The original plastic bracket did not allow the HobbyWing AXE540 to fit properly.
So, I designed and 3D printed a custom bracket that is currently installed in this model, however the original one is included.
You may be able to see that custom bracket in the bottom photos provided. Item Price 2.2 Inch Beadlock Wheels $ 43.00 Aluminum Body Shell Brackets $ 11.00 Aluminum Front Bumper $ 20.00 Aluminum Front Bumper Mount $ 21.00 Aluminum Rear Bumper $ 30.00 Aluminum Rear Bumper Mount $ 20.00 Aluminum Tie Rod Linkage Brackets $ 18.00 Aluminum Upper Shock Tower Brace $ 21.00 Axial Racing 11T Pinion Gear - 3mm Shaft $ 11.00 Axial Racing 12T Pinion Gear - 3mm Shaft $ 7.00 Axial SCX10 III Jeep Wrangler JL 1/10 Scale Rock Crawler Kit $ 370.00 Cooling Fan & Heatsink $ 9.00 Fast Eddies SCX10 III Sealed Bearing Kit $ 45.00 High Clearance Links (Stainless Steel) $ 65.00 Hobbywing AXE 550 System - ESC/Motor Combo $ 140.00 INJORA Jeep Wrangler Hard Body Convertible $ 51.00 JX HV1151MG Waterproof Micro Servos $ 46.00 KYX Aluminium Alloy Rear Suspension Bracket Arm $ 21.00 Metal Skid Plates $ 20.00 Metal Trailer Hitch $ 20.00 Powershift RC Winch Controller $ 35.00 ProTek RC 370TBL "Black Label" Waterproof Servo $ 160.00 RC4WD Z-S1079 1/10 Warn 9.5cti Winch $ 30.00 Reef's RC 99 Waterproof Micro Servo $ 60.00 Savox Micro Servos $ 20.00 Stainless Steel Hardware Kit $ 35.00 Traxxas E-Revo Receiver Box $ 7.00 Traxxas GTS TRX-4 Shock Set (4 Shocks) $ 65.00 Treal Brass Weighted Front Steering Knuckle Covers $ 25.00 Treal Front Steering Knuckles $ 56.00 Treal SCX10 III Aluminum 7075 Front Axle - Black $ 98.00 Vangquish Incision All Metal Front & Rear Driveshafts $ 60.00 Vanquish Products SLW 600 Wheel Hubs $ 21.00 VITAVON CNC Aluminum Front Shock Tower Mounts $ 29.00 VITAVON CNC Aluminum Panhard Mount $ 17.00 VITAVON CNC Aluminum Rear Axle - Black $ 118.00 VITAVON CNC Aluminum Rear Shock Tower Mounts $ 26.00 VITAVON CNC brass portal cover black $ 66.00 Wheel Lug Nuts $ 9.00 Rock Lights - LED's Total: $1,926.00
Price type
IN STOCK
OUT STOCK
.
